Megaİzo Lastik 10 S103

Megaİzo Lastik 10 S103

KYK Construction Chemicals
It is a fully elastic waterproofing material consisting of cement-based powder component and polymer emulsion-based liquid component, which can be applied before the top coat material, suitable for use in drinking water tanks.

Waterproofing mortar Waterproofing membrane Construction chemicals insulation Liquid-applied waterproofing systems Waterproofing Cement based waterproofing


Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Megaİzo Lastik 10 S103 product.

Offer Request Add to Panel

It is applied before coating materials such as ceramics as a waterproofing material in wet areas such as bathrooms, kitchens, balconies, terraces, pools and water tanks. It is used indoors and outdoors, on horizontal and vertical surfaces.

Performance
• Initial adhesion strength: ≥ 0.5 N/mm² TS EN 14891 : A.6.2
• Adhesion strength after contact with water: ≥ 0.5 N/mm² TS EN 14891: A.6.3
• Adhesion strength after heat aging: ≥ 0.5 N/mm² TS EN 14891: A.6.5
• Adhesion strength after freezing - thawing cycle: ≥ 0.5 N/mm² TS EN 14891: A.6.6

Application Limits
• Pot life: Maximum 3 hours
• Waiting time between floors: Minimum 6 hours
• Time required for application: Minimum 3 days

Mixing ratio
• The powder component (20 kg) and the liquid component (10 kg) must be mixed completely.

Consumption
• Recommended consumption amount for 2 mm film thickness; It is 3.0 – 3.8 kg/m2. This value may vary depending on the surface and ambient conditions.

- TSE / CMO2P
- CE