MegaSıva H201


It is an acrylic emulsion-based, ready-to-use, final coat decorative plaster with a gross concrete appearance, used indoors and outdoors, applied with a trowel, and given different patterns with special equipment.


Please click on "Offer Request" button below to send your offer and detailed information request to the company for the MegaSıva H201 product.


It is used as a final coat of decorative plaster on mineral surfaces such as rough plaster, concrete, cement-based board, gypsum plaster, gypsum board, fixed plywood and old painted surfaces, on thermal insulation board plaster mortar.

Performance
• Gloss: Class G3 TS 4318 EN ISO 2813
• Dry film thickness: Class E5 TS EN 1062 - 1
• Grain size: Class S3 TS 2585
• Water vapor transfer rate: Class V2 TS EN ISO 7783 - 2
• Water transfer rate: Class W2 TS EN 1062 - 3

Application Limits
• Drying Time: Minimum 24 hours
• Full drying time: 7 days
• Time to wait after primer application: Minimum 4 hours
• Time to wait for the pattern: Minimum 15 minutes
• Chemical Structure: Acrylic emulsion based, ready-made plaster
• Density: 1.70 ± 0.1 gr/cm³
• Grain Size: ≤ 1000 µm
• Color: Dark gray (Concrete color), Light gray
• During the application, the surface and ambient temperature should be between +5°C and +30°C.

Mixing ratio
• MegaSıva H201 is ready to use.

Consumption
• Recommended consumption amount for 1 mm thickness per 1 m2; It is 2.50 ± 0.25 kg. This value may vary depending on the surface and ambient conditions.

- Conforms to TS 7847.
- CE