MegaTamir T503
Please click on "Offer Request" button below to send your offer and detailed information request to the company for the MegaTamir T503 product.
It ensures the adhesion of the existing concrete with the new concrete. It is used for bonding concrete, stone, metal, wood, mortar, brick, prefabricated concrete, epoxy, GRP parts among themselves and to each other. It is used for bonding metal profiles to concrete and to each other. It is used in non-structural concrete and crack repair. It is used on horizontal and vertical surfaces indoors and outdoors.
Performance
• Compressive strength: 60 – 70 MPa TS EN 12190
• Flexural strength: 25 – 30 MPa TS EN 12190
• Tensile strength: 15 – 20 MPa DIN 53504
• Adhesion strength to concrete: 2.75 - 3.25 Mpa TS EN 1542
Application Limits
• Use time of the prepared mortar – Pot Life: (23 °C) - 30 minutes
• Bonding time on new concrete (Working time): (23 °C) -105 minutes / (35°C) - 45 minutes
• Opening time (Full drying time): (23 °C) - 12 hours
• During the application, the surface and ambient temperature should be between +10°C and +30°C.
Mixing ratio
• Component A (2.50 kg) and component B (1.25 kg) must be mixed thoroughly.
Consumption
• Recommended consumption amount for 1 mm thickness per 1 m2; It is 1.4 kg. This value may vary depending on the surface and ambient conditions.
- Conforms to TS EN 1504-3 / Class R4.
- CE