MegaTamir T108


Cement-based, high strength, polymer and fiber added structural repair mortar, resistant to sulfate and chlorine attacks, resistant to temperature changes.


Please click on "Offer Request" button below to send your offer and detailed information request to the company for the MegaTamir T108 product.


It is used in repairing reinforced concrete structures under the ground, filling rod holes, and repairing surface defects of high-strength concrete elements. It is suitable for use indoors and outdoors, on horizontal and vertical surfaces.

Performance
• Compressive strength: ≥ 45 MPa (R4) TS EN 12190
• Bond strength formed by bonding: ≥ 2 MPa TS EN 1542
• Chloride ion content: ≤ 0.05% TS EN 1015 - 17

Application Limits
• Use time of the prepared mortar - Pot Life: Maximum 30 minutes
• Application thickness: Minimum 5 mm - Maximum 50 mm (in one layer)
• Time to wait for second coat application: 4 - 5 hours
• Time required to open to traffic: Minimum 24 hours
• During the application, the surface and ambient temperature should be between +5°C and +30°C.

Mixing Ratio
• It is mixed with water at the rate of 18-21% of its weight. (4.5-5.25 liters of water for 25 kg packaging)

Consumption
• The recommended consumption amount for 2 mm thickness in 1 m2 is 3.9-4.3 kg. This value may vary depending on the surface and ambient conditions.

- TSE / Class R4
- CE