MegaTamir T502
Please click on "Offer Request" button below to send your offer and detailed information request to the company for the MegaTamir T502 product.
MegaTamir EpoGrout T502 is used on load-bearing surfaces, machine foundations, machine mounting and column bottom plates, compressor, high-speed turbine, crane rails. It is used as a coating, repair, filling and horizontal crack repair material resistant to dynamic loads, friction and impact, in warehouse and loading areas, industrial floors, airports, runways and aprons, bridge supports. It is suitable for indoor and outdoor use on horizontal surfaces.
Performance
• Hardness (shore D hardness): 83 ASTM D 2240; DIN 53505
• Bending strength: 45 N/mm2 DIN 52371; TS 985
• Tensile strength: 19 N/mm2 DIN 53504; TS 1967
• Compressive strength 1st day 45 N/mm2 TS EN 12190
• Compressive strength 7th day 70 N/mm2 TS EN 12190
• Compressive strength 14th day 70 N/mm2 TS EN 12190
Application Limits
• Use time of the prepared mortar - Pot life: Maximum 1 hour
• Pre-drying: Minimum 8 hours
• Time to open to traffic: Minimum 24 hours
• Full cure: Minimum 1 week
• During the application, the surface and ambient temperature should be between +10°C and +30°C.
Mixing ratio
• Component A (12.75 kg) and component B (2.25 kg) are mixed.
Consumption
• Recommended consumption amount for 1 mm thickness per 1 m2; It is 1.90-2.10 kg. This value may vary depending on the surface and ambient conditions.
- Conforms to TS EN 1504-3 / Class R4.
- CE