MegaFuga Sil D102
Please click on "Offer Request" button below to send your offer and detailed information request to the company for the MegaFuga Sil D102 product.
MegaFuga Sil D102 is used on floors with a joint gap of 2 - 10 mm, where coating materials such as ceramic, natural stone, granite ceramic, marble are used, and in wet areas such as bathrooms and terraces. It is suitable for use in horizontal and vertical joint gaps indoors and outdoors.
Performance
• High wear resistance: ≤ 1000 mm3 TS EN 12808 - 2
• Bending strength after dry storage: ≥ 2.5 N/mm2 TS EN 12808 - 3
• Flexural strength after freezing - thawing cycles: ≥ 2.5 N/mm2 TS EN 12808 - 3
• Compression strength after dry storage: ≥ 15 N/mm2 TS EN 12808 - 3
• Compression strength after freezing - thawing cycle: ≥ 15 N/mm2 TS EN 12808 - 3
• Shrinkage: ≤ 3 mm/m TS EN 12808 - 4
• Reduced water absorption, 30 min. at the end: ≤ 2 gr TS EN 12808 - 5
• Reduced water absorption, 240 min. at the end: ≤ 5 gr TS EN 12808 – 5
Application Limits
• Usable time of the prepared mortar - Pot Life: Maximum 1.5 hours
• Drying time: Minimum 12 hours
• Opening time to traffic: 24 - 48 hours
• During the application, the surface and ambient temperature should be between +5°C and +30°C.
Mixing ratio
• It should be mixed with water at the rate of 30 - 33% of its weight. ( 6.0 - 6.6 liters of water for 20 kg packaging)
Consumption
• The amount of consumption varies according to the condition of the application surface and the size of the coating material used.
TSE / CG2WA class - G