Zeolit Bathroom&Spa Paint

Brand: DÜFA

It is a special pure acrylic-based, water-based, matt-looking decorative interior top coat wall paint. It is a special pure acrylic based paint developed to prevent condensation (perspiration) problem due to high humidity on the paint film in humid environments such as bathrooms, kitchens and spas. It prevents condensation caused by temperature difference as it provides thermal insulation between the floor and the paint surface with its empty micro-capsules. Thanks to the thermal insulation it provides, the paint containing micro-capsules also prevents the heat loss of the interior. It adheres perfectly to any surface. It does not crack, spill or yellow.


Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Zeolit Bathroom&Spa Paint product.


It can be easily applied on all kinds of plaster, gross and gas concrete, betopan, gypsum board, old painted walls and ceilings, mdf, osb surfaces and paintable wallpaper after the recommended floor formation and priming process.

APPLICATION
The surfaces to be applied must be dry, clean and free of dust. Old and swollen painted surfaces should be scraped and cleaned. If necessary, damaged and loose surfaces should be putty with “Düfa Acrylic Interior Wall Putty” in order to smooth the surface. It is recommended to use a single coat of "Ultra Acrylic Transparent Primer" or "Ultra Acrylic 1/7 Concentrated Primer" on absorbent surfaces such as putty, satin plaster applied or chalky, in order to reduce the consumption of topcoat paint and increase the adhesion of the paint to the surface after the correction process. Synthetic paint applied surfaces should be sanded and all dust should be removed. It is recommended to use a single coat of “Ultra Acrylic Covering Primer” as a transformation primer when changing from synthetic painted surface to water-based surface and in case of color changes. “Zeolit ​​Bath & Spa Paint” is applied to the primed surfaces, thinned by 20% with water at most, and applied in 2 layers with a roller or brush. Waiting time between coats is 3-4 hours (it may vary depending on the ambient temperature). Application temperature should be between 5˚C and 35˚C.

DRYING TIME
Dry to the touch: 30–40 minutes.
Waiting between coats: 3-4 hours.
Complete drying: 24 hours. (23 °C and 50% Humidity)

CONSUMPTION
Depending on the absorbency and type of the surface, an area of ​​14-18 m² is painted in one coat. For exact consumption, field sample study should be done.