Classic Dufaplast Silicone
Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Classic Dufaplast Silicone product.
It can be easily applied to all kinds of plaster, gross and gas concrete, betopan, gypsum board, old painted walls and ceilings, mdf, osb surfaces after the recommended floor formation and priming process.
APPLICATION
The surfaces to be applied must be dry, clean and free of dust. Old and swollen painted surfaces should be scraped and cleaned. If necessary, the damaged and loose surfaces should be putty with “Düfa Acrylic Interior Wall Putty” in order to smooth the surface. It is recommended to use a single coat of "Ultra Acrylic Transparent Primer" or "Ultra Acrylic 1/7 Concentrated Primer" on absorbent surfaces such as putty, satin plaster applied or chalky, in order to reduce the consumption of topcoat paint and increase the adhesion of the paint to the surface after the correction process. Synthetic paint applied surfaces should be sanded and all dust should be removed. It is recommended to use a single coat of “Ultra Acrylic Covering Primer” as a transformation primer when changing colors from synthetic painted surface to water-based surface. "Classic Düfaplast Silicone" is applied to the surfaces on which primer application has been made, by thinning it with water by a maximum of 20% and in 2 layers with a roller or brush. Waiting time between coats is 3-4 hours (it may vary depending on the ambient temperature). Application temperature should be between 5˚C and 35˚C.
DRYING TIME
Dry to the touch: 30–40 minutes.
Waiting between coats: 3-4 hours.
Complete drying: 24 hours. (23°C and 50% Humidity)
CONSUMPTION
Depending on the absorbency and type of the surface, 12-14 m² lt area is painted in one coat. For exact consumption, field sample study should be done.