Diamond Plastic Matt

Diamond Plastic Matt

Kayalar Kimya
Brand: DÜFA
Water-based, acrylic copolymer resin-based and matt looking decorative interior wall paint. It has high covering capacity and ensures good adherence to recommended surfaces. It is easy to apply as it spreads well. It enables the application surfaces to breathe. It is odourless and environment-friendly.

Decoration interior paints Water based paint


Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Diamond Plastic Matt product.

Offer Request Add to Panel

It can be easily applied to any kind of plaster, exposed and gas concrete, concrete panel, plaster board, walls and ceilings with old paints, mdf, osb surfaces after recommended basis forming and primer procedures. The application areas should be dry, clean and free from dust.

APPLICATION
The application areas should be dry, clean and free from dust. The old and blistered painted surfaces should be cleaned by scraping. Rough or loose surfaces should be filled with "Düfa Acrylic Interior Putty" when necessary in order to smoothen the surface. After smoothening process, it is recommended to use "Ultra Acrylic Transparent Primer" or "Ultra Acrylic 1/7 Concentrated Primer" of one coat on absorbent surfaces such as the calcareous ones or ones on which satin plaster and putty are applied so as to reduce top coat paint consumption and enhance adhesion of paint on surface. The surfaces on which synthetic paint is applied should be sandpapered and it should be free of dust. It is recommended to use "Ultra Acrylic Cover Primer" of one coat as transformation primer while shifting from synthetic painted surface to water-based surface and in case of colour changes. It is applied on surfaces as two coats on which “Diamond Plastic Matt" primer has been applied by roll or brush after diluting by 20% at maximum with water. Waiting time between coats is 3-4 hours (may vary according to ambient temperature). Application temperature should be between 5˚C and 35˚C.

DRYING TIME
Touch Dry: 30–40 minutes. Waiting between coats: 3–4 hours. Through-dry time: 24 hours.(23 °C and 50% Humidity)

CONSUMPTION
Depending on absorbing capacity and type of the surface, an area of 12-14 m² is painted on single layer. Field sample work should be carried out for precise consumption.