Polyfin FCM 4012v FPO Geomembrane

Polyfin FCM 4012v FPO Geomembrane

Polyfin
Brand: Polyfin®
Polyfin FCM* 4012v FPO (Flexible Polyolefin) Geomembrane is an ideal solution for foundation ( with or without piles ) and wall waterproofing when 100% adherence of the geomembrane to the freshly cast concrete is required. Providing 100% water tightness by fully adhering to freshly poured concrete, the material is 1.2 mm net in thickness with a glass fleece reinforcement in the middle and a special PP geotextile lamination at the bottom. This structurally non-aging and environmentally friendly material has higher mechanical properties then similar prufe/proof type of materials. *Fresh Concrete Membrane

Watertight geomembrane Waterproofing and dampproofing insulation membrane


Please click on "Offer Request" button below to send your offer and detailed information request to the company for the Polyfin FCM 4012v FPO Geomembrane product.

Offer Request Add to Panel

Trapezoidal Metal Sheet Roofs with Heat Insulation
Reinforced Concrete Flat Roofs
Renovation of Existing Bitumen Membrane Roofs
Renovation of Existing Sandwich Panel Roofs
Drinking Water Storage Units
Ponds

Roll Dimensions (DIN EN 1848-2): 1.05, 1.50 & 2.10 m x 20 m
Actual Thickness (DIN EN 1849-2): 2.0 mm
Tear Resistance (DIN EN 12310-1): ? 200 N
Tensile Strength (DIN EN 12311-2): ? 7,0 N/mm² (method B)
Elongation (DIN EN 12311-2): ? %500 (method B)
Water Tightness (DIN EN 1928-B): passed
Joint Shear Resistance (DIN EN 12317-2): ? 400 N/50 mm
Resistance to Static Load (DIN EN 12730 Method A/B): > 20 kg
Dimensional Stability (DIN EN 1107-2): ? %0,3
Chemical Resistance (DIN EN 1847 Annex C): passed
Foldability at low Temperatures (DIN EN 495-5): ? -40° C
Resistance to Impact (DIN EN 12691): > 750 mm
Water Vapor Diffusion Resistance Factor: 90.000 (DIN EN 1931 – method B)
Exposure to Bitumen (prEN 1548): passed

CE, 20 years International Product Insurance

Pressure Test
Pressure Test