Insulating Profiles

• THERMAL TRANSMITTANCE
STAC conducts studies to recommend proposals and solutions that allow you to achieve the best thermal transmittance coefficients for your system.
• CUSTOM DESIGNS
STAC creates custom designs for your system, giving you an exclusive solution that adds value to your product on the market.
• ATG-CERTIFIED
STAC have ATG technical approval, the highest level of recognition in the manufacture of thermal break polyamide profiles.
• POLYAMIDE FOAMS
Besides polyamide profiles, STAC offers polyamide foam or polyethylene with a thermal conductivity of just 0.036 W/(m.K). These foams have an adhesive film on their inner side, so that you don’t have to worry about this process. Polyamide foam is suitable for both coating and anodising.
• GLUE WIRE
Glue wire forms a very powerful bond between the polyamide profile and the aluminium profile when coating is performed subsequently. This is due to the fact that, during the paint curing process, polyamide profiles suffer a small loss of volume, with the possibility of a loss of shear tightness of the polyamide profiles. STAC can prevent this from happening thanks to glue wire, which fills and fuses the two materials.
• COATING POSSIBILITIES
Sometimes it is necessary to maintain the black colour of polyamide after coating in the case of untreated profiles. If this is the case, it is not a problem thanks to the possibility of adding an adhesive film that can withstand high temperatures and that is removed after the coating process. This technique is called "masking".
• SOME OF PROFILES
- Polyamide or polyurethane foam profiles
- Flat profile
- C-shaped profile
- Support profile for central joint
- Profile with weatherstrip grooves
- Profile with chamber divider
- Profile for curtain wall
- Special profiles